10 Different Types Of Taps And Where You Can Use Them

different types of taps

When planning a bathroom or kitchen redecoration, it is essential to know the different types of taps available on the market. Taps come in different prices, designs, and with varying functionalities. The one for you will depend on your water needs and where you intend to install it.

To help you with your search, here’s a list of the 10 most common types of taps.

10 Different Types Of Taps

1. Pillar Tap


Image source: Pinterest

The pillar tap is the most basic and one of the most common taps. It is usually mounted on baths and basins and consists of two separate outlets for hot and cold water.

A pillar tap is like a faucet—a spout at one end and a handle at another. The handle has a lever or a lever-like mechanism that allows turning on or off the water supply and even controls the speed of the water.

They come in a wide variety of designs, both modern and timeless. As a pillar tap has two separate faucets, it is also one of the most customizable taps. These taps are ideal for people with disabilities as they open easily, often just requiring a gentle push.

2. Mixer Tap


Image source: Pinterest

The mixer tap is popular in modern homes. It is a tap with two handles—one for cold water and another for hot water. So, a mixer tap is almost like two pillar taps joined, with one spout and two handles.

They have gained much popularity as they allow temperature adjustment with a simple adjustment of the handles and provide ideal temperature in a single stream of water.

3. Monobloc Tap


Image source: Pinterest

Monobloc taps are modern mixer taps with a single spout for hot and cold water. Instead of two handles, they come in a one-handle design. You can slide the handle in one direction for hot water and the opposite direction for cold water.

4. The Washer Tap


Image source: Pinterest

Also known as compressor washer taps, the tap is great for DIY enthusiasts. It is a pillar tap with a twisting handle; however, it is the washer inside the taps that operates and controls the speed and amount of water.

5. Disc Tap


Image source: Pinterest

Their ability to go from nothing to full-blast makes disc taps stand out. The tap has a ceramic disc with holes which, when aligned properly, allow water to flow through.

They are easily confused with the monobloc tap type, as they have a similar adjustable handle mechanism. However, the holes in the disc get clogged easily, so the tap needs regular repairs and replacements.

6. Ball Tap


Image source: Pinterest

Ball taps are similar to disc taps. However, instead of a disc, a ball sits inside the tap. The hollow ball controls the speed of water flow and the hot and cold water mix. They are known for their easy operation. However, they are also prone to leaks.

7. Cartridge Taps


Image source: Pinterest

The cartridge tap is a combination type of tap with an inner cartridge that controls its workings. It has a lever handle for adjusting water temperature as well as flow. Moving it to the left or right adjusts the water temperature. Moving it up and down adjusts the strength of water flow.

8. Wall-Mounted Taps

Wall Mounted

Image source: Pinterest

As the name suggests, these taps are fitted to the wall. They have a handle on one side and a spout on the other. The biggest advantage of this type of tap is that you can mount them in places where there is no space for other types of taps. However, as the piping is inside the wall, repairs can be very costly.

9. Sensor Tap


Image source: Pinterest

Sensor taps have the latest technology. They sense your hand below the tap and turn on the water flow. Likewise, it will sense when you remove your hand and stop the water flow. They are on the expensive end and work on electrical systems or batteries.

10. Bidet Tap


Image source: Pinterest

A bidet tap or bidet shower is a handheld spray or shower used to assist in cleaning genitals after urination or defecation. They come in many designs and complement most modern bathrooms.

Where Can These Taps Be Used?


Pillar Tap: If you have a traditional bathroom, a pillar tap is perfect. You can run a bath with both taps open at the same time to give the desired temperature. But as hot and cold water comes from different taps, they are not ideal as kitchen taps. Owing to the inconvenience of using 2 taps, the use of pillar taps is mostly discontinued.
Mixer Tap: As mixer taps have a single spout that provides water at ideal temperature, they can be installed in a bathroom, basin, and even a kitchen sink.
Monobloc Tap: Monobloc taps are modern mixer taps and come in a variety of designs. They are most suitable for deck mounting on stone baths and stone basins.
Washer Tap: Washer taps were more common in older homes. They are much cheaper but are also prone to leaks. They can be installed in baths as well as basins and sinks.
Disc Tap: Disc taps can be operated with a gentle push and are great for people with limited mobility. They can be installed in bathrooms and kitchens.
Ball Tap: They can be used in gardens and beer handles as they are more reliable and can go all the way on or off.
Cartridge Tap: As cartridge taps can control the temperature as well as the pressure of water, they can be installed in garages, bathrooms, and kitchens.
Wall-Mounted Tap: They are used when there is not enough counter space for a regular tap. As they are mounted on the wall, they can be used for any bathtub or kitchen sink.
Sensor Tap: Sensor taps are often found in movie theaters, shopping malls, and other shared spaces. They offer a hand-free approach, which offers peace of mind against the spread of germs. Along with that, sensor taps are also a great water-saving solution.
Bidet Tap: Bidet taps are used in toilets.

How To Choose The Right Tap: 10 Tips


When choosing a tap, keep the following tips in mind:

1. Choose features and longevity over style. Choose practical over pretty.
2. Do not spend too much on taps. You can explore a wide range of designs and styles even on low budgets.
3. The spout height and tap reach are critical factors. Spouts come in a wide range of length. You can choose the best-looking spout. However, if you have a shelf above the tap, a tall spout may not be ideal. Similarly, a three-bowl kitchen sink will require a longer spout.
4. Consider the number of holes in your sink. There are different types of taps available, but the kind of tap you can install will depend upon the number of holes in your sink. Most sinks have three holes, so you will need a cover plate if you choose a single-handed faucet.
5. Ceramic valves are preferable as they are less likely to have leaks.
6. Choose a single-handle tap as they are more convenient. Such taps allow easy temperature adjustments and are easier to operate and clean.
7. Faucet-mounted sprayers or pull-down sprayers are better than side sprayers, as they are less likely to leak and cost the same.
8. Match the finish with the aesthetics of your bathroom or kitchen. Taps come in many designs, shapes, and colors like matte, gold, and ceramic. Decide on the style that complements the area’s overall design.
9. Check the water pressure of the taps, as some may have a minimum pressure gauge consideration.
10. Taps are available in various waste fitting types like pop-up, click-clack, chained, or flip. Double-check the fitting type before finalizing a tap.

Similar Posts